Toshiba Portege R600 - Page 259

4.12 HDD/SSD 4 Replacement Procedures
4.12.1 HDD
Removing the HDD
To remove the HDD, follow the steps below and refer to Figure 4-16.
1. Lift up the HDD from the slot.
2. Disconnect the HDD from the connector on the HDD FPC.
HDD FPC
HDD
Guide
Guide
Figure 4-16 Removing the HDD
Installing the HDD
To install the HDD, follow the steps below and refer to Figure 4-16.
1. Connect the HDD to the connector on the HDD FPC.
2. Set the HDD into the guides of the slot.
PORTÉGÉ R600 Maintenance Manual (960-709) [CONFIDENTIAL] 4-31