Toshiba Portege R600 - Page 260

4 Replacement Procedures 4.12 HDD/SSD
4.12.2 SSD
Removing the SSD
To remove the SSD, follow the steps below and refer to Figure 4-17.
1. Remove the following screws securing the SSD.
• M1.4×3C S-THIN HEAD ×4
2. Disconnect the SSD from the connector on the SSD FPC.
SSD FPC
SSD
M1.4x3C S-THIN HEAD
M1.4x3C S-THIN HEAD
Guide
Guide
Figure 4-17 Removing the SSD
4-32 [CONFIDENTIAL] PORTÉGÉ R600 Maintenance Manual (960-709)