35
Getting Started
Setting up your device
❖ Power button—Turns the device ON and OFF. Press
and hold the button for several seconds to turn the
device ON/OFF. Press the button quickly to wake the
device from Sleep mode or to place it into Sleep mode.
For more information, see “To Shut down your device”
on page 40.
Bottom
(Sample Illustration) Bottom view
❖ Emergency Pen*—Allows you to keep an Emergency
Pen with you at all times (available on certain models).
To remove the emergency pen gently twist and pull
straight out.
❖
DC-IN—Allows you to charge the battery and run the
device on AC power via the Power cable.
Pen
(Sample Illustration) Pen
❖ Pen button—Hold to enable the Right mouse click
functionality.
Setting up your device
TECHNICAL NOTE: You must complete all setup steps
up to and including “Setting up your software” on
page 39 before adding external or internal components
to your device. These components include, but are not
limited to, a mouse, keyboard, and printer.
DC-IN
Emergency Pen*
*Available on certain models
NOTE
Pen*
*Available on certain models
To Next Page
Loading...
