Toshiba PORTEGE WT20-B Series - To place your device in Sleep mode

41
Getting Started
To place your device in Sleep mode
To place your device in Sleep mode
1 Swipe in from the right edge of the screen.
2 When the Windows charms appear, tap/touch the
Settings ( ) charm.
If you power down using the Sleep command and the
battery discharges fully, your unsaved information will be
lost. Be sure to save your work first.
3 In the lower right of the screen tap/touch the
Power ()
icon.
(Sample Image) Sleep
4 Tap/touch the Sleep option.
Sleep mode saves the current state of the device to
memory so that, when you restart the device, you can
continue working from where you left off.
It is recommended that you do not tap/touch the screen
while powering ON or placing the device into Sleep
mode, as the functionality may be affected.
Adding optional external devices
Before adding external devices, Toshiba recommends
setting up your software. See “Setting up your software”
on page 39.
After starting your device for the first time you may want to:
❖ Connect external devices (see “Connecting an external
device” on page 53)
❖ Connect an external monitor (see “Using external
display devices” on page 53)
Sleep option
NOTE
NOTE