90
Utilities and Applications
Password Utility
Deleting a supervisor password
To delete a supervisor password:
1 To access Supervisor Password from the Start screen,
tap/touch a blank area on the screen and begin typing
Password Utility.
2 Tap/touch
Password Utility.
A pop-up screen appears asking for a password.
3 Enter your password, and then tap/touch
Verify.
4 Tap/touch
Supervisor Password.
5 Tap/touch
Delete.
An authority verification pop-up screen appears.
6 Tap/touch
Delete.
7 Enter the password, and then Tap/touch
Verify.
8 Tap/touch
OK to exit.
Using a user password
A user password provides power-on password protection.
Setting a user password
If you choose to set a supervisor or user password,
TOSHIBA strongly recommends that you save your
password in a location where you can later access it
should you not remember it.
TOSHIBA is not responsible for any losses that may
occur to you, your organization or others as a result of the
inability to access your device.
To Next Page
Loading...
