91
Utilities and Applications
Password Utility
To register a password for the power-on password functions:
1 To access User Password from the Start screen,
tap/touch a blank area on the screen and begin typing
Password Utility.
2 Tap/touch
Password Utility.
3 Tap/touch
User Password.
(Sample Image) User Password tab
4 Tap/touch Set.
5 Enter your password, and then enter it again to verify.
6 Tap/touch
Set.
7 Tap/touch
OK to save your password as a text file.
Password Utility will suggest “memo.txt” for the text file
name. If you have saved a password previously, using
the same name may overwrite your password text file
with the new password. By using a different name, you
can prevent overwriting your previously stored
passwords.
8 Tap/touch
Save.
9 Tap/touch
OK.
NOTE
To Next Page
Loading...
