72
Mobile Computing
Using the eco power plan
Using the eco power plan
This device is equipped with the eco power plan. Operating
the device with this power plan enabled reduces electrical
power consumption by slightly lowering system
performance. For example, when this power plan is enabled,
the brightness of the display is reduced and the interval
before Sleep mode takes effect is shortened. To enable or
disable the eco power plan, see “Power Plans” on page 70.
The eco Utility
®
monitors your power savings from using the
eco power plan by tracking real-time power consumption
and accumulated savings over time. To learn how to access
the utility, see “eco Utility” on page 87.
For more information on the eco power plan, see the Help
file in the eco Utility window.
Changing the device battery
The device’s battery is not accessible by the user.
When your main battery has run out of power, plug in the AC
adaptor.
If you find that a new battery is needed, contact the location
where you purchased the device for more information on
replacing the battery. Toshiba will not be responsible for any
product damage, data loss, service, or part replacement
made necessary by improper installation of a new battery.
If the device is leaking or its case is cracked, put on
protective gloves to handle it.
Taking care of your battery
The following sections offer tips on how to take care of your
battery and prolong its life.
NOTE
To Next Page
Loading...
