Toshiba RAS-10G2KVP-E - Page 107

Electric parts 7) Disconnect the connector of
box assembly. fan-motor, louver-motor and high voltage
generator.
8) Pull out TCJ sensor from sensor holder
of the evaporator.
Pull out TC sensor from sensor holder
of the evaporator.
Remove TA sensor form sensor holder.
9) Remove fixing screw that hold
electronic part, then remove
electronic parts.
<How to assemble the electric parts box>
1) Lock the top of electric box with hook of
Frame-up and secure it by fixing screw
with Back-body. After that connect
the connector of High-voltage-generator,
Fan-motor and Louver-motor.
2) Insert TA/TC/TCJ sensor into holder-
sensor.
Fix the grounding-lead with fixing screw.
No. Part name Work procedure Remarks
High voltage
generator connector
Fan motor
Louver motor
connector
TCJ sensor
TC sensor
TA sensor
Fixing screw
5
FILE NO. SVM-14017
− 106 –