Toshiba RAS-10G2KVP-E - Page 108

Frame 1) Follow to the procedure
-
2) Remove the fixing screws (5 pcs.)
3) Remove screw of earth lead on plate earth.
4) Take off 5 hooks from rear side
then remove Frame assembly.
5) Remove a fixing screw of ground lead
then remove Earth assembly.
<How to assemble the Frame>
1) Press the top of Frame with 5 hooks of
Back-body
2) Fix Frame by 5 fixing screws.
Horizontal louver 1) Remove shaft of the horizontal louver
from the back body. (First remove the
center shaft, and then remove the
other shafts.)
No. Part name Work procedure Remarks
2 Screws
3 Screws
5 hooks from rear
Earth screw.
5
6
1
4
Earth
screw
− 107 –
FILE NO. SVM-14017