− 60 −
15.
COMFORT SLEEP OPERATION
To save energy while sleeping, automatically control air flow and automatically turn OFF.
Press : Select 1, 3, 5 or 9 hrs for OFF timer operation.
Note: The cooling operation, the set temperature will increase automatically
1 degree/hour for 2 hours (maximum 2 degrees increase). For heating operation,
the set temperature will decrease.
FILE NO. SVM-14017
14.
POWER-SELECTION OPERATION
This function is used when its circuit breaker is shared with other electrical appliances.
Press : Select: (for 100%), (for 75%), (for 50%)
In case of 75% and 50% level, number "75" or "50" also flashes for 2 seconds.
It limits the maximum current/ power consumption to 100%, 75% or 50%.
The lower the percentage, the higher the saving and also the longer the compressor lifetime.
• When the level is selected, PWR-SEL level flashes on LCD display for 3 seconds.
inadequate capacity may occur.
• Due to the reason that POWER SELECT FUNCTION limits the maximum current,
13. QUIET OPERATION
To operate at ultra low fan speed for quiet operation (except in DRY mode)
Press [Fan] Button : Start and stop the operation.
Note: Under certain conditions, QUIET operation may not provide adequate
cooling or heating due to low sound features.
To Next Page
Loading...
