More user manuals on ManualsBase.com
– 91 –
Connector Connector
Screw
High voltage
generator
Screw
High voltage
generator
ScrewScrew
ClawClaw
ClawClaw
No.
Part name
High voltage
generator
Procedures
1) Follow to the procedure in the item
.
2) Disconnect the connectors of the
high-voltage generator, and disconnect the
four leads from where they are fitted into
the other components.
3) Remove the fixing screw which secures the
high voltage generator, and remove the
high voltage generator from the evaporator.
<How to assemble the high voltage generator>
1) Put the high voltage generator on the
evaporator and then fix it with two screws.
2) Pass the leads of the high voltage
generator through the area designated and
insert them into its connectors.
Remarks
To Next Page
Loading...
