Toshiba RAS-M18GACV-E - Page 128

Appendix-5
Appendix
S
ound
in
su
l
a
tion
b
o
a
r
d
Partition
p
late
assembl
y
M
o
t
o
r
base
assembl
y
Valve fixin
g
plat
e
Heat exchan
g
e
r
Com
p
resso
r
No.
1-5
1-6
1-7
Photo / Explanatory diagram Procedure
Remove the motor base assembly, partition plate assembly
and the sound insulation board.
Related parts / Screws list
Part name
Motor base assembly
(Including motor and fan)
Partition plate assembly
(Including reactor)
Used screw
Screw type Quantity
Ø4 × 8 2
Ø4 × 8 3
Remove the fixing screws of the heat exchanger and the valve
fixing plate. Remove the compressor fixing bolt.
Related parts / Screws list
Part name
Heat exchanger
Valve fixing plate
Compressor
Used screw
Screw type Quantity
Ø4 × 8 1
Ø4 × 8 1
Bolt 3
As shown in the left figure, remove the set of refrigeration
cycle assembly from the outdoor unit base plate.
∗ In this time, work attentively so that the cycle pipes are not
damaged by dent or deformation.
Apply protective measures to pipes if necessary.