– 63 –
8-1-5. Wiring and Setting of Remote Controller Control
(Setup method)
One or multiple indoor units are controlled by 2 remote controllers.
(Max. 2 remote controllers are connectable.)
[Operation]
1. The operation contents can be changed by Last-push-priority.
2. Use a timer on either Master remote controller or Sub remote controller.
Terminal block for
remote controller cables
Remote controller
cables (Procured locally)
Indoor unit
Outdoor unit
Remote controller
switch (Sub)
Remote controller
switch (Master)
Sold
separately
21 3
21 3
BA
B BA A
Sold
separately
2-remote controller control
(Controlled by 2 remote controllers)
This control is to operate 1 or multiple indoor units are operated by 2 remote controllers.
(Max. 2 remote controllers are connectable.)
• When connected 2 remote controllers operate an indoor unit
To Next Page
Loading...
