4 Replacement Procedures
4-16 Minnesota 10A/10AG Series Maintenance Manual
4.6 Expansion Memory
Removing the Expansion Memory Modules
To remove the memory module, make sure the computer is in boot mode before removing the
memory module. Remove the battery pack, cables and any optional devices before you start
and then follow these steps:
1. Release the black non-separate screw securing the memory module socket cover.
Figure 4-13 Releasing the cover screw
2. Slide your fingernail or a thin object under the cover and lift it off.
Figure 4-14 Removing the expansion memory module cover
To Next Page
Loading...
