4 Replacement Procedures
4-26 Minnesota 10A/10AG Series Maintenance Manual
4.10 Display Assembly
Removing the Display Assembly
To remove the display assembly, first remove the battery and any optional devices. Also
remove the keyboard, as described in the previous sections. Then follow the steps below:
1. Turn over the laptop. Remove seventeen (17) M2.5x8 screws securing the bottom cover,
and three M2x3 screws from inside the battery compartment.
Figure 4-25 Removing screws from the bottom cover
2. Turn the laptop over. Remove four M2.5x8 screws from the top cover.
Figure 4-26 Removing screws from the top cover
To Next Page
Loading...
