4 Replacement Procedures
Satellite A210/ A215, Satellite Pro A210, EQUIUM A210, SATEGO A210 Series Maintenance Manual
4-51
Installing the Function Button Board
To install the function button board, follow the steps below and refer to the figures in the
preceding section.
1. Place the function button board into the holder on the rear of the top cover at a 45-degree
angle. Push down and press into place.
2. Connect the cable to the connector on the system board.
3. Secure the function button board with one M2.0x2.5 screw.
To Next Page
Loading...
