Replacement Procedures
4
4.9 Display assembly
Removing the display assembly
The following describes the procedure for removing the display assembly (See Figure 4-13 to
4-17).
1. Close the display and turn the computer upside down.
2. Open the MINIPCI Door and remove the wireless LAN screws and antenna connector.
M2.0x3.0 FLAT BIND
(Locktight)
Figure 4-13 Removing the screws (securing display assembly)
3. Open the display and removing the k/b holder and keyboard. (please refer figure 4-
8,figure4-9).
4. Disassembly TOP ASSY
4-24
Satellite A300 Maintenance Manual(960-Q08)
To Next Page
Loading...
