Toshiba Satellite P200 Series - Network Connection and Security Considerations; SSID and Wi-Fi Adapter Recognition; Network IP Address Configuration

4.27 LCD Module 4 Replacement Procedures
4.27 LCD Module
Removing the LCD Module
To remove the LCD module, first remove the display assembly and display mask, and FL
inverter board connectors. Then follow the steps below:
1. Unhook all cables from the fasteners around the edge of the top chassis.
2. Remove six M2.5x6 screws securing the LCD module to the top chassis.
Figure 4-81 Removing the LCD module screws
Satellite P200 / P205 Series Maintenance Manual [CONFIDENTIAL] 4-67