3. Tests and Diagnostics
3.6 Main Battery Charge Test
NOTE: The AC adaptor (90W, 19V) should be connected to successfully run this test.
This test shows and measures the main battery:
Battery type (Lion)
Manufacturer (Sanyo/Panasonic/Sony)
Remain charge capacity (0 ~ 100%)
Charge function (PASS/FAIL)
- “Battery Is Full” showed when “remain charge capacities” is 100%
The screen should display as below, if the charge function is OK, will show:.
If the charge function is NG, the screen will display as:
Satellite P200/P205 /Satellite Pro P200 Series Maintenance Manual 3-11
To Next Page
Loading...
