Toshiba Satellite Pro U300 - Executing the Diagnostic Test

Test Program for Field.
3.2 Executing the Diagnostic Test
DOS is required to run the Diagnostics Program. To start the programs follow these steps:
1. Create a DOS bootable disk and copy all the files from the Tests and Diagnostics
software to the disk.
2. Insert the boot disk into the computer’s floppy disk drive and turn on the computer.
The following screen displays:
::Select item
ESC :Escape
TOSHIBA Satellite(Pro) U300 Diagnostics
Version v1.00 (C) Copyright QUANTA Corp. 2005-
[ DIAGNOSTICS MENU ]
01.DIAGNOSTIC TEST
02.RUNNING TEST
03.DMI INFORMATION
04.LOG UTILITIES
05.SYSTEM CONFIGURATION
06.OPTION
99.EXIT
3. To select the Diagnostic Test from the Diagnostics Menu use the arrow keys to set the
highlight bar to 01 and press Enter.
4 Satellite U300 and Satellite Pro U300 Tests and Diagnostics Manual