Test Program for Field.
3.16 Running Test
NOTES:
1. You may add or delete subtests using the Running Test Edit Item function, see Section
3.20.
2. Do not forget to insert a work disk in the FDD. If a work disk is not inserted an error
will be generated during the Floppy Disk Test.
3. If the test completes successfully an “PASS” sign with blue letters displays on the
screen.
4. If the test fails or is interrupted before completion an “FAIL” sign with red letters
displays on the screen.
5. If running item not select an “NOITEM” sign with green letters display on the screen.
6. All errors which occur during execution of the Running Test are logged in the Log
File.
7. This program is executed according to the Count Loop number selected in the
Running Test Edit Item, see Section 3.20. To terminate the program, press Ctrl +
Break.
58 Satellite U300 and Satellite Pro U300 Tests and Diagnostics Manual
To Next Page
Loading...
