Toshiba Satellite Pro U300 - Display Assembly

Replacement Procedures
4
4.10 Display assembly
Removing the display assembly
The following describes the procedure for removing the display assembly (See Figure 4-13 to
4-17).
1. Close the display and turn the computer upside down.
2. Open the MINIPCI Door and remove the wireless LAN screws and antenna connector.
M2.5x4.0 FLAT BIND
(Locktight)
Figure 4-13 Removing the screws (securing display assembly)
Satellite U300 and Satellite Pro U300 Maintenance Manual (960-Q08) 44