Toshiba Satellite Pro U300 - Page 233

Replacement Procedures
11. Remove the following screws securing the LCD support (LCD unit side) and remove
the LCD supports from the LCD unit.
• M2.0x3.0 BINK screw x4
M2.0x3.0
BINK
LCD support
Inverter
LCD logo LCD cable
M2.0x3.0
BINK
Bluetooth
Antenna
Wireless
Antenna
Latch
LCD
LCD support
Figure 4-34 Removing the LCD supports
Satellite U300 and Satellite Pro U300 Maintenance Manual (960-Q08) 4-55