2 Troubleshooting Procedures
Check 2 USB FDD may be faulty. Replace it with a new one. If the problem still occurs,
perform Check 3.
Check 3 Connect USB FDD to each port embedded on system board.
If it does not work properly when connected to CN12, CN19, CN20 or all ports,
perform Check 4.
Check 4 System board may be faulty. Replace it with a new one following the steps in
Chapter 4, Replacement Procedures.
Satellite U300 and Satellite Pro U300 Maintenance Manual (960-Q08)
ٛٛٛٛٛٛ
27
To Next Page
Loading...
