31
CONTROLS AND FEATURES
English
The picture position may be adjusted to suit personal preference
and can be particularly useful for external inputs.
a In the Preferences menu, press B or b to select
Display Settings and press OK.
b In the Display Settings menu, press B or b to select
Picture Position.
c Press OK to view the options available for the picture
format that has been selected.
d Press B or b to select an option, and then C or c to
adjust the settings.
The options differ depending on the currently
selected widescreen format and the input signal.
To return to the original factory settings, select Reset
in the Picture Position menu and press OK.
This feature is used to hold a still image on the screen.
a Press r to hold an image on the screen, and press
r again to cancel.
When the HDMI Information Display feature is On and you are
watching an HDMI input source, pressing the button
displays the HDMI signal information banner.
a In the Preferences menu, press B or b to select
HDMI Information Display.
b Press C or c to select On.
HDMI signal information is as follows:
Resolution, Scan Type, Frame Rate*, Aspect, Bit Depth,
Colour Space, RGB/YUV, Chroma Format, and Content
Type (if available).
* If the HDMI input source is interlaced, “Field Rate”
will be displayed instead of “Frame Rate”.
Picture Position
Picture still
To Next Page
Loading...
