62
CONTROLS AND FEATURES
English
Input selection and AV
connections
See page 7 for a detailed image showing
recommended connections.
Most media recorders and decoders send a signal through the
SCART lead to switch the television to the correct Input socket.
Alternatively, press the external source selection button
o
until the picture from connected equipment is shown.
Use the Input Selection window if the television does not switch
over automatically.
a By pressing o on the remote control or TV, a list will
appear on screen showing all inputs and external
equipment.
HDMI® displays equipment connected to Input HDMI
on the back or side of the television.
PC displays a computer connected to Input RGB/PC on
the back of the television.
This feature is designed to make input selection more convenient
by allowing you to skip unused inputs.
a Press MENU / Cc / B / Cc to highlight Setup/
Preferences icons and press OK.
b Press B or b to select AV Connection.
c Press OK to display the AV Connection menu.
d Press B or b to highlight Input Labeling and press
OK.
e Press B or b to select the input you want to skip, and
then press the RED button to turn on the skip.
f To turn off the skip, press the RED button again.
The input set to Skip is grayed out in the Input
Selection window and is skipped over when you press
o on the remote control.
Input selection
To Next Page
Loading...
