43
CONTROLS AND FEATURES
English
Using Media Player with USB
When Auto Start is enabled, you will be asked if you
want to start the Media Player whenever a USB device
is inserted. If Auto Start is disabled (or if you want to
connect to a DMS on the network), you must manually
start the Media Player from the menu.
To change the Auto Start setting:
a Press MENU / Cc / B / Cc to highlight Media
Player/Media Player Setup icons and press OK.
b Press B or b to select USB Auto Start, and then press
C or c to select On or Off.
Auto Start:
a Insert USB device into the USB socket on the left side
of the TV. A prompt will appear.
b Press C or c to select Yes, and then press OK.
c Press B or b to select Photo, Movie, or Music and
press OK.
NOTE: If Auto Start is set to Off, you can start the Media
Player manually.
Manual Start:
a Insert USB device into the USB socket on the left side
of the TV.
b Press MENU / Cc to highlight Media Player icon.
c Press B / Cc to highlight Photo, Movie or Music
icon and press OK. The contents list will appear.
To select a file in the list of contents:
a Press Bb (C c) to select a file or folder.
b Press OK to move to the next layer, or press BACK to
return to the previous layer.
To close the Media Player:
a Press EXIT.
Using the Media Player with a DLNA CERTIFIED™
Server
You need to configure a home network before using
this feature (see page 11).
a Press MENU / Cc to highlight Media Player icon.
b Press B / Cc to highlight Photo, Movie, or Music
icon and press OK. The thumbnail (for Photo) or list of
files (for Movie and Music) will appear.
NOTE: If there is more than one media server on the
network, a list of all media servers will be displayed.
Highlight the server you want to use, and press OK.
c Press B or b to select a DMS if the selection window
is displayed.
Basic operation
To Next Page
Loading...
