8
Strata CT Standard Telephone User Guide November 2001
Call Forward Features
Call Forward
You can set your station to Call Forward (CF) to another station or voice mail for a variety of
conditions, described in Step 2.
➤
To set Call Forward
1. Lift the handset. You hear internal dial tone.
2. Enter a Call Forward
access code:
You hear confirmation tone.
#601
= All Calls Call Forward-All Calls—forwards all calls immediately; your
telephone does not ring.
#602
= Busy Call Forward-Busy—forwards calls immediately when your
telephone is busy or in Do Not Disturb mode.
#603
= No Answer Call Forward-No Answer—forwards calls to another station if
you do not answer within a certain time (that you designate). Not
available from a rotary telephone.
#604
= Busy/No
Answer
Call Forward-Busy/No Answer—forwards calls immediately to
another station whenever you are busy on another call. Calls will
also forward if you do not answer within a certain time (that you
designate). Not available from a rotary telephone.
3. Enter the destination
number.
This is the phone number where calls will forward.
4. If setting CF-No
Answer or CF-Busy/
No Answer, press
*
,
enter the time in
seconds, then press
#
.
You can enter the amount of time that your telephone rings
before it forwards (08~60 seconds). Always enter two digits. If
you do not wish to change the ring time, press
*
then
#
to make
the ring time the same as the last setting.
You hear a confirmation tone after pressing
*
and again after
pressing
#
.
To Next Page
Loading...
