36
Strata CT Standard Telephone User Guide November 2001
Paging Access Codes Using the Toshiba Stratagy Voice Mail Systems
➤
To access a line
➤ Press [PDN] + Exchange Line Access Code
Paging Access Codes
Your telephone can be assigned to page group(s). Telephones can be a member of more than one
group and each group can have as many as 120 stations. Station users can access each group
separately by dialling an access code (Tables 2~3).
➤
To enter a paging group access code
➤ Press [PDN] + Access Code.
Table 1 Exchange Line Access Codes
Processor Exchange Line Access Codes
B1CU 9 or 801~808 or #7001~#7032
B2CAU/B2CBU, B3CAU/B3CBU 9 or 801~816 or #7001~#7120
B5CAU/B5CBU 9 or 801~816 or #7001~#7200
Notes
♦
In some systems, 9 accesses a general group code, an outside line, or Least Cost Routing (LCR). System
users are required to dial 9 in order to access an outside line. If you press 9 in a system programmed with
LCR, you may not hear internal dial tone, depending on system programming.
♦
801~816 accesses line groups 1~16, respectively.
♦
#7001~#7200 accesses individual lines 1~200, respectively.
Table 2 Paging Groups
Paging Group Access Code Paging Group Access Code
Station Group A #311 Station Group E #315
Station Group B #312 Station Group F #316
Station Group C #313 Station Group G #317
Station Group D #314 Station Group H #318
Note If you are storing onto a Speed Dial code, enter
44
in place of
#
.
To Next Page
Loading...
