EasyManua.ls Logo

Toshiba Strata DK 16 - Dk8 and Dk16 Smdr Printout Examples

Toshiba Strata DK 16
321 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
INSTALLATION-PERIPHERALS
SECTION 100-816-207
MARCH 1993
7-26
FIGURE 7-19
DK8 AND DK16 SMDR PRINTOUT EXAMPLES
01 15 08:14 00:00;22
01 MODM 08:15 00:00;18
03 10 08:16 00:00;28
03 DISA 08:16 00:00;15
01 DISA 08:17 00:00;25
03 MSS 08:18 00:00;12
03 15 08:19 00:00;22
03* 12 08:19 00:00;16
04 10 08:20 00:00;34
02 10 08:22 00:00;22
01 15 08:23 00:00;40
<DD/MM/YY, EVERY FIFTY CALL RECORDS AND AT MIDNIGHT>
00;00
00;08 12
00;06 15
123456987
12345678912345678965412365
7145833700
7145833700
456789
123456789456321
(FC: 35-60)
(FC: 62-76)
(FC: 30-33)
(FC: 24-28)
(FC: 15-22)
(FC: 9-13)
(FC: 4-7)
Field Column (FC: 1-2)
Account Code
(4~15 digits)
Outgoing Telephone Number (1~26 digits)
Station to which the CO Line was transferred (1~4 digits)
Time of Day (HH:MM; hour and minute the call was released)
Call Duration (HH:MM:SS, see Note 1)
Station Number (1~4 digits; see Note 2)
CO Line Incoming Ring Duration Before Answer (MM:SS)
CO Line Number (01~36)
NOTES:
1.
2.
3.
4.
5.
6.
*
3
<DISA CALL TO IMDU>
<OUTGOING DISA ACCESS BY INCOMING DISA 01>
<INCOMING DISA AND ACCESS CO 03 OUTGOING>
<05 ANSWERS DISA CALL 12 SECONDS AFTER DK DIAL TONE>
07/06/90
First Digit (varies) Last (always this column)
First Digit (varies) Last
6
3
3
3
3
3
3
3
Call Duration (incoming, outgoing, or transfer) can be 1.0 or 10 seconds (minimum) to generate a call record
printout (see Program 60-2).
“MSS”: designates a Direct Inward System Access (DISA) CO call to a station that is not answered; or, answered
after 1.0 or 10 seconds (depending on Program 60-2). DISA calls always register 05 ~ 06 seconds ring before
answer duration time.
“MODM”: designates a call to the IMDU, Remote Maintenance Modem.
“DISA”: designates a DISA call thru the system via CO to CO connection.
Field column information is provided for SMDR output formatting purposes.
The call record data is ASCII-formatted, 8 bits; no parity, 1-stop bit.
Special dial printout:
Tone = "T"
Long pause = "L"
Flash = "F"
Pause = "P"
The "
*
" indicates that the call was disconnected by the Central Office Calling Party Control (CPC) or Automatic
Release (AR) signal. CO lines must have Programs 15-0 and 15-3 enabled to be dropped by the CPC signal.
12

Table of Contents

Related product manuals