Toshiba Strata DK 16 - Dk8 and Dk16 Pdiu-Ds Disassembly;Assembly Diagram

INSTALLATION-PERIPHERALS
SECTION 100-816-207
MARCH 1993
7-50
FIGURE 7-33
DK8 AND DK16 PDIU-DS DISASSEMBLY/ASSEMBLY DIAGRAM
PDIU-DS
PCB
DTE/MODEM
JUMPER PLUGS
P1~P9
SW1
SIDE GROOVES
BOTTOM
PANEL
Do not cut the PERCEPTION jumper wire for
STRATA DK8 or DK16 installations.
Jumper wire is for PERCEPTION applications only.
See Table 8-D regarding external power requirements.
EX.
POWER
W2
W1
PERCEPTION
W3
NOTES:
1.
2.