Toshiba Strata DK 16 - Connecting the Dk16 Expansion Unit to the Dk16 Base Unit

INSTALLATION-DK16 KSU & PCB
SECTION 100-816-205
MARCH 1993
5-6
HINGE
MOUNT
PULL
LOCK
PUSH
UNLOCK
SAFETY LOCK
(SUPPLIED WITH
EXPANSION UNIT)
RIBBON CABLE (FROM EXPANSION UNIT – PLUGS
INTO EXPANSION CONNECTOR (P3) OF BASE UNIT)
BACK OF DK16
EXPANSION UNIT
DK16 BASE
UNIT
GREEN/YELLOW
FG2 WIRE AND PLUG
(FROM EXPANSION
UNIT – PLUGS INTO
TB1 OF BASE UNIT)
TB1 (FG2)
P3
RIBBON
CONNECTOR
LOCK
FIGURE 5-5
CONNECTING THE DK16 EXPANSION UNIT TO THE DK16 BASE UNIT