Toshiba Strata DK 16 - Page 251

REMOTE ADMINISTRATION AND MAINTENANCE PROCEDURES
SECTION 100-816-600
MARCH 1993
-1-
1 USING REMOTE ADMINISTRATION AND MAINTENANCE
1.01 Figure 1 is provided as a quick reference aid in using this section.
FIGURE 1
SECTION FLOWCHART
General Description: The functions available on
STRATA DK systems via a Local or Remote Terminal
are explained in Paragraph 2.
The hardware and installation requirements are
explained in Paragraphs 3 and 4.
Paragraph 14 provides an equipment compatibility list.
To terminate Local and Remote Terminal operation;
Paragraph 13.
To exit and/or change modes; Paragraph 12.
To set-up and operate a Local
Terminal, see Paragraph 5.
To set-up and operate a Remote
Terminal, see Paragraph 6.
To enter Operation Modes from a Local or Remote
Terminal:
• Program
• Data Printout
• Test
• LCD Message Entry
• Speed Dial Entry
See Paragraph 7.
To output data
to a printer via
a terminal;
Paragraph 9.
To test via a
terminal;
Paragraph 10.
To set messages
via a terminal;
Paragraph 11.
Programming via
a terminal;
Paragraph 8.
2
3 4
5 6
7
8
9
10 11
13
14
15
To change or
review speed dial
via a terminal;
Paragraph 12.12