T4900CT
3.24.2 Accessing the SETUP Program
Moving Within the SETUP Menu and Changing Values
1. Press ← and → to move between the two columns. Press ↑ and ↓ to move
between items in a column.
2. Press either the spacebar or BkSp to change the value.
Accepting Changes and Exiting the SETUP Window
1. Press End to accept the changes you made.
If the changed item does not require the system to reboot, the following message is
displayed:
Are you sure? (Y/N)
If the changed item requires the system to reboot, the following message is dis-
played:
Are you sure? (Y/N)
The changes you made will cause the system to reboot.
The changes you made will cause the system to reboot.
Select 0 from the DIAGNOSTICS MENU and press Enter to display the following:
↑ ↓ → ← : Select items Space, BkSp : Change values
Esc: Exit without saving Home: Set default values End: Save changes and Exit
DISPLAY
POWER ON PASSWORD
Not Registered
Battery Save Mode = Economy Power
Battery Display = Time
Manual Set of Battery Level
= E F
Total = 8192KB
Base = 640KB
Extended = 7360KB
Shadow BIOS ROM = 192KB
OTHERS
Display Adapter = VGA Compatible
LCD Display Mode = Color
Ext. Scan Mode = Interlace
LCD Display Colors = 256K Colors
Power On Display =
Internal/External
Text Mode Stretch = Disabled
Power-up Mode = Boot
CPU Cache = Enabled
Speaker Volume = High
Alarm Power On = Disabled
Pointing Devices = Auto-selected
Boot Priority = FDD→HDD
Sound I/O Address = 0530H
Ext. Keyboard "Fn" key equivalent
= Disabled
HARD DISK
HDD Mode =
Enhanced IDE(Normal)
Serial Port = COM1 (IRQ4/3F8H)
Int. Parallel Port = LPT1(378H)
DS Parallel Port = Output
COM/PRT
T4900CT SETUP
MEMORY
BATTERY
BIOS Version = *.**
To Next Page
Loading...
