T4900CT
Subtest 04 IPS
This subtest checks the functions of the pointing stick as shown below.
a) IPS stick pressure sensing direction and parameter.
b) IPS switch function check.
This test reports the IPS motion response from the IPS stick and IPS switch by
displaying the location parameters. When the stick is pressed towards the
upper left, the <POINTING> display changes to the following image. If an
IPS switch is pressed, the <BUTTON> display alternates black and white and
appears on the right side of the display. If two IPS switches are pressed, it
returns to the subtest menu.
<< PRESS BUTTON1 + BUTTON2 THEN END >>
To Next Page
Loading...
