Toshiba Tecra 8200 Series - DVD-ROM;CD-RW Drive Disassembly Steps; FDD Disassembly; FDD Disassembly Steps

FDD DISASSEMBLY
FDD DISASSEMBLY
4. Disconnect the connector flexible cable from the
FDD.
NOTE: The brackets, flexible cable and the screws
are separate parts.Please DO NOT return them
to TOSHIBA.
TOSHIBA
Tough Enough for Today’s World.
FIELD REPLACEABLE UNIT DOCUMENTATION
Tecra
TM
8200 Series
2. Remove four M2x4 black screws
3. Remove the frame.
4. Remove two M2x8 silver screws.
5. Remove the spacer, connector, and the connector
cover from the CD/DVD ROM drive.
DVD-ROM/CD-RW DRIVE DISASSEMBLY
M2x6 silver screw
Plastic cover
Connector cover
M2x4 black
screws
M2x4
silver
screw
M2x3 black
screws
Connector cover
Connector
Spacer
M2x8 black
screws
1. Remove the following six screws from the Select bay
module:
- Four M2.5x4 black screws
- One M2x6 silver screw
- One M2x4 silver screw.
2. Remove the connector cover and the plastic cover..
3. Remove the FDD from the FDD bracket.
FDD
FDD bracket
Connector Flexible cable
FDD