7-8 User’s Manual
HW Setup
USB Memory BIOS Support Type
Set the type of the USB memory as a startup device.
Button Setting
Standby
Set this option for high speed recovery from the Standby mode.
HDD Set the type of the USB memory to be equivalent
to the HDD (Default).
* Based on the [HDD] order in the [Boot Priority
Options] item. The order with respect to the other
HDD can be set in the [HDD Priority Options]
item.
FDD Set the type of the USB memory to be equivalent
to the FDD.
* Based on the [FDD] order in the [Boot Priority
Options] item.
Fast Recover from the Standby mode at high speed.
Please ensure that the AC adaptor is connected
when selecting this mode.
Normal Recover from Standby mode at normal speed.
To Next Page
Loading...
