8-14 User’s Manual
Optional Devices
2. Connect the TV adaptor cable’s S-Video plug to the Video-out jack on
the TV.
3. Press the TOSHIBA Application button.
You can use the hot keys Fn + F5 to change the display device. Refer to
Chapter 5, The Keyboard.
To use "TV OUT" function by "TOSHIBA Application button", it is necessary
to change the settings of "TOSHIBA Application button" in advance.
To open "TOSHIBA Controls" properties, click Start, click Control Panel,
click Printers and Other Hardware, select "TOSHIBA Controls", and set
"TV OUT" to "TOSHIBA Application button" on "Button" tab.
Changing the resolution
If you want to change the resolution, follow the steps below.
1. Open Display properties and select the Settings tab.
2. Select Advanced.
3. Select the Adapter tab, then select List all modes.
4. Select a resolution from the menu.
Displaying movies on a TV or CRT
This section describes how to set up your system to display movies
simultaneously on your computer’s internal LCD and on an external TV or
CRT monitor.
Follow the steps below.
1. Open the Control Panel and click Appearance and Themes.
2. Click Display.
3. Select the Settings tab and click Advanced button.
If a television is connected to the computer, set the TV type in Display
Properties. Follow the steps below.
a. Click start and click Control Panel.
b. Double-click the Display icon to open the Display Properties
window.
c. Click the Settings tab and click the Advanced button.
d. Click the GeForce Go 6200 TE 64M/6600 TE 128M tab, click
Device Settings and click Select TV format.
e. Select Advanced and select TV Settings in the TV Settings
window.
f. Select the Signal format box and select the format that your TV
supports.
To Next Page
Loading...
