1-8 User’s Manual
Introduction
Ports
Slots
Supplied Tablet PC
Pen
A pen enables data entry directly through the
display screen.
Reserve Pen A pen enables data entry directly through the
display screen. Supplied pen uses a pen instead
of Tablet PC Pen at the time of loss or breakage.
Some computers in the series are equipped with
a Reserve Pen.
External monitor Analog VGA port supports VESA DDC2B
compatible functions.
Universal Serial Bus
(USB 2.0)
The computer has Universal Serial Bus ports that
comply with the USB 2.0 standard, which
enables data transfer speeds 40 times faster
than the USB 1.1 standard (The ports also
support USB 1.1).
Docking interface This port enables connection of an optional
Advanced Port Replicator III described in the
Options section.
i.LINK™ (IEEE1394) This port enables high-speed data transfer
directly from external devices such as digital
video cameras.
Infrared The serial infrared port is compatible with
Infrared Data Association (IrDA 1.1) standards. It
enables cableless 4 Mbps, 1.152 Mbps, 115.2
kbps, 57.6 kbps, 38.4 kbps, 19.2 kbps or 9.6
kbps data transfer with IrDA 1.1 compatible
external devices.
PC card The PC card slot accommodate a Type II card.
SD card This slot lets you easily transfer data from
devices, such as digital cameras and Personal
Digital Assistants, that use SD card flash-
memory.
You can use memory module in this slot.
Refer to Chapter 8, Optional Devices.
To Next Page
Loading...
