2-8 User’s Manual
The Grand Tour
Be sure to lock the Slim Select Bay lock before you transport or carry the
computer.
Slim Select Bay lock
screw
One screw secures the Slim Select Bay lock.
Docking interface This port enables connection of an optional
Advanced Port Replicator III and Tablet Multi
Dock II described in Chapter 8, Optional Devices.
Keep foreign objects out of the docking interface port. Never allow metal
objects, such as screws, staples and paper clips, to enter the PC or
keyboard. Foreign metal objects can create a short circuit, which can
cause PC damage and fire, possibly resulting in serious injury. A plastic
shutter protects the connector.
Notches Notches on the computer engage hooks on the
Advanced Port Replicator III to hold the
connection securely.
Memory module
cover
This cover protects two memory module sockets,
one module is preinstalled. Refer to the Memory
expansion section in Chapter 8, Optional
Devices.
Battery release latch Slide and hold this latch to release the battery
pack for removal.
For detailed information on removing the battery
packs, refer to Chapter 6, Power and Power-Up
Modes.
Battery lock Slide this lock to release the battery pack for
removal.
Battery pack The battery pack powers the computer when the
AC adaptor is not connected. For detailed
information on the battery pack, refer to Chapter
6, Power and Power-Up Modes.
Reserve Pen Reserve Pen is contained in the battery pack of
Underside. Reserve Pen enables data entry
directly through display screen. Refer to the
Using the Tablet PC Pen and Reserve Pen Pen
section in Chapter4, Operating Basics.
VGA cooling fan vent This cooling fan in takes air to cool VGA.
To Next Page
Loading...
