3 Tests and Diagnostics 3.20 ONLY ONE TEST
Subtest 03 GP Button
This subtest checks the moving of the of the front operation panel button.
Press the Toshiba Presentation button after the following message appears.
Press [ Assist ] button
Press the Toshiba Assist button after the following message appears.
Press [ Presentation ] button
If the test ends successfully, the display returns to the ONLY ONE TEST
menu.
Subtest 04 Kill Switch
This subtest checks if the Wireless communication switch works properly.
If the test is started with the switch ON, following message appears in the
display.
Kill switch is set to a start position (OFF)
Slide the switch to OFF position. Then, following message appears in the
display.
KILL SWITCH ON !!
Slide the switch to ON position. Then, following message appears in the
display.
KILL SWITCH OFF !!
After Sliding the switch to OFF position, return to the ONLY ONE TEST
menu automatically.
3-42 [CONFIDENTIAL] TECRA M5 Maintenance Manual (960-542)
To Next Page
Loading...
