Toshiba Tecra M5 - GPU Heat Sink

4 Replacement Procedures 4.17 GPU heat sink
4.17 GPU heat sink
Removing the GPU heat sink
To remove the GPU heat sink, follow the steps below and refer to Figure 4-30.
1. Remove the following screws and GPU holder.
• M2×4S BIND screw ×2
2. Remove the GPU heat sink.
GPU heat sink
M2×4S BIND
GPU holder
Figure 4-30 Removing the GPU heat sink
4-46 [CONFIDENTIAL] TECRA M5 Maintenance Manual (960-542)