Toshiba Tecra M5 - Sound Board

4 Replacement Procedures 4.14 Sound board
4.14 Sound board
Removing the Sound board
To remove the sound board, follow the steps below and refer to Figure 4-25 to 4-26.
1. Disconnect the sound board cable from the connector CN9510 on the sound board
and the connector CN9500 on the system board.
2. Disconnect the USB cable from the connector PJ9511 on the sound board and the
connector CN9501 on the system board.
3. Remove the sound board from the base assembly.
Sound board cable
USB cable
CN9510
PJ9511
Sound board
Figure 4-25 Removing the sound board
4-40 [CONFIDENTIAL] TECRA M5 Maintenance Manual (960-542)