Toshiba Tecra M5 - Page 235

4 Replacement Procedures
TECRA M5 Maintenance Manual (960-542) [CONFIDENTIAL] 4-v
Figure 4-28 Removing the video cable holder ................................................................ 4-44
Figure 4-29 Removing the video board........................................................................... 4-45
Figure 4-30 Removing the GPU heat sink.......................................................................4-46
Figure 4-31 Removing the CPU holder........................................................................... 4-48
Figure 4-32 Unlocking the CPU...................................................................................... 4-49
Figure 4-33 Installing the CPU........................................................................................4-50
Figure 4-34 Applying new grease ...................................................................................4-51
Figure 4-35 Removing the fan......................................................................................... 4-52
Figure 4-36 Removing the system board/HDD cable/DC-IN jack (1)............................ 4-54
Figure 4-37 Removing the system board/HDD cable/DC-IN jack (2)............................ 4-55
Figure 4-38 Removing the system board/HDD cable/DC-IN jack (3)............................ 4-55
Figure 4-39 Removing the system board/HDD cable/DC-IN jack (4)............................ 4-56
Figure 4-40 Removing the LAN/Modem jack.................................................................4-57
Figure 4-41 Removing the PC card slot ..........................................................................4-58
Figure 4-42 Removing the battery lock........................................................................... 4-59
Figure 4-43 Removing the mask seal, mask lubber and screw........................................ 4-61
Figure 4-44 Removing the FL inverter............................................................................ 4-62
Figure 4-45 Removing the LCD unit............................................................................... 4-63
Figure 4-46 Removing the LCD support......................................................................... 4-64
Figure 4-47 Removing the touch pad assembly .............................................................. 4-66
Figure 4-48 Removing the finger print sensor board ......................................................4-68
Figure 4-49 Removing the Bluetooth module................................................................. 4-70
Figure 4-50-a Removing the LCD cable holder ................................................................. 4-72
Figure 4-50-b Removing the hinge from top cover ............................................................ 4-73
Figure 4-51 Removing the LCD cable.............................................................................4-74
Figure 4-52 Removing the hinge..................................................................................... 4-75
Figure 4-53 Removing the hinge..................................................................................... 4-76
Figure 4-54 Removing the speakers................................................................................ 4-78
Figure 4-55 Removing the wireless LAN/Bluetooth antenna ......................................... 4-80
Figure 4-56 Removing the LCD cover latch ................................................................... 4-82
Figure 4-57 to 4-60 Replacing Samsung fluorescent lamp (XGA)) (1) to (4) .......4-84 to 4-86