4.18 CPU heat sink/CPU 4 Replacement Procedures
3. Remove the CPU heat sink.
CAUTION: When removing the heat sink, be careful not to damage the CPU under the
fin.
4. Unlock the CPU by turning the cam counterclockwise on the CPU socket by 90
degrees with a flat-blade screwdriver.
Figure 4-32 Unlocking the CPU
5. Remove the CPU.
CAUTION: When removing the CPU, lift it up right above. Otherwise, pins of CPU may
be damaged.
TECRA M5 Maintenance Manual (960-542) [CONFIDENTIAL] 4-49
To Next Page
Loading...
