4.28 Hinge 4 Replacement Procedures
2. Remove the following screws.
• M2.5x3B S-THIN HEAD screw ×2
• M2.5x4B FLAT HEAD screw × 2
3. Remove the hinge from the top cover.
Hinge
M2.5×4B FLAT HEAD
M2.5×3B S-THIN
HEAD
M2.5×3B S-THIN HEAD
Hinge
Figure 4-50-b Removing the hinge from top cover
TECRA M5 Maintenance Manual (960-542) [CONFIDENTIAL] 4-73
To Next Page
Loading...
