4.28 Hinge 4 Replacement Procedures
TECRA M5 Maintenance Manual (960-542) [CONFIDENTIAL] 4-77
4. Install the hinge (left) and secure it with the following screw.
• M2.5×4S Tapping screw ×1
5. Install the earth plate and secure it with the following screw.
• M2×4B S-THIN HEAD screw ×1
6. Install the LCD cable holder B while engaging the latches.
7. Pass the wireless LAN and Bluetooth cables along the guides on the hinge.
8. Pass the wireless LAN and Bluetooth cables through the hole.
9. Stick the insulator.
10. Set the hinge on the top cover and secure with following screws.
• M2.5x3B S-THIN HEAD screw ×2
• M2.5x4B FLAT HEAD screw ×2
11. Install LCD cable holder A while setting the latch.
To Next Page
Loading...
