Toshiba TLP-T50M - Optical Engine

1-6
3-4. Optical Engine
Step Figure Explanation
1 . Remove 1 screw (a) on the lamp housing, and cut the
cable retainer. Remove the white cable from the cable
retainer.
. Remove 1 screw (a) of the cable retainer, and 2 screws
(b and c) of lamp housing.
. Disconnect the ballast power cable (thick Black) and
thermal switch cables (Red and Black) from the lamp
housing.
Screw: type [M-4]
2 (a) Remove 4 screws (3 x 12).
Screw (a): type [M-5]
(b) Remove 2 screws (3 x 8).
Screw (b): type [M-4]
3 Optical engine can be removed by lifting slowly up.
Cable retainer
Cable retainer
Cable retainer
( a )
( a )
( a )
( c )
( c )
( c )
( b )
( b )
( b )
( a )
( a )
( a )
( a )
( a )
( a )
( a )
( a )
( a )
( a )
( a )
( a )
( b )
( b )
( b )
( b )
( b )
( b )