1-12
3-7. Polarized Plate on the Sub Frame (Continued)
Step Figure Explanation
1 <Installation>
When installing the polarized plate, the film side must
face the LCD panel, and the color marking must be the
same color as the LCD panel.
2 When installing the polarized plate to the sub frame,
install it in the position corresponding to each color on
the sub frame.
3 When installing, projects the black screen, and tighten 3
screws (M2 x 2) in the position where the screen
becomes the darkest.
Screw: type [E-2]
Red
To Next Page
Loading...
