Toshiba TLP-X150 - Making a Presentation with Converted JPEG Files; Creating a Screen Capture and Converting It into a JPEG File

54
55
Operations
(9) (a) In the JPEG Conversion Tool window, click the
Conversion button.
(b) The resolution selection dialog box appears. Select a
desired resolution and click the
OK button.
(c) A confirmation dialog box opens. Click
Yes.
The computer begins to convert the file. When it finishes,
a message appears informing you that “
a JPEG file has
been created”.
Making a presentation with converted JPEG files
(1) Copy the folder created by the JPEG Conversion Tool, and/or its contents, onto a
USB memory device.
(2) Use step
1
in “Playing a slide show from a thumbnail list”
p.48
to display a list
of thumbnails.
(3) Follow the instructions in step
2
in “Playing a slide show from a thumbnail list”
p.48
to find the thumbnail of the first slide, Slide001.jpg, and move the orange
frame to it. (Select Slide001.jpg)
(4) Press the
button on the remote control. An enlarged view of the first slide
appears on the screen. This starts the presentation.
(5) To continue to the next slide, click the remote control’s
button. To go back to the
previous slide, click the
button.
■
(9)-(c)(9)-(c)
(9)-(b)(9)-(b)
Creating a screen capture and converting it into a JPEG file
This function saves the current computer screen as a JPEG file.
(1) In the
Conversion Method field, select Creating screen
capture.
(2) In the
File settings field, click the Browse button for File
name after conversion.
The
Save As dialog box appears.
(3) In the
Save As dialog box:
(a) Specify the location in which to save the converted file;
(b) Enter a file name of up to 8 characters in the
File Name
field; and
(c) Click the
Save button.
(4) (a) In the
JPEG Conversion Tool window, click the
Conversion button.
(b) The resolution selection dialog box appears. Select
a desired resolution and click the
OK button.
(c) A confirmation message appears. Click
Yes.
The computer creates a screen capture, and
converts it into a JPEG file in the specified location.
When it is finished, a message appears to tell you that “
a
JPEG file has been created”.
Note
The selected resolution in the dialog box will be the maximum resolution of the
converted image file. Specify the resolution (1024 x 768 dots) in accordance
with your projector’s resolution.
■
•
(1)(1)
(2)(2)
(4)-(a)(4)-(a)
(3)-(b) (3)-(c)
(3)-(a)
(4)-(c)
(4)-(c)
(4)-(b)(4)-(b)
How to use the JPEG Conversion Tool (Continued)